DEVELOP INEO 6500 DRIVER DOWNLOAD

There are 3 opening positions available according to the mode and the paper length. Mechanism Folding consists of the 1st folding and 2nd folding. Registration loop control The FNS conveyance motor M1 turns OFF temporarily to stop conveyance of paper when the specified time has passed since paper exit sensor PS13 detected the leading edge of the paper. Double-sided mode thick-paper mode: M31 starts the returning operation to the home position [5] when the bundle press motor M23 starts releasing the press [4]. The actual life of each consumable will vary depending on use and other printing variables including page coverage, page size, media type, continuous or intermittent printing, ambient temperature and humidity. S Legal restrictions on copying

Uploader: Toll
Date Added: 12 October 2006
File Size: 69.49 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 14876
Price: Free* [*Free Regsitration Required]

The bundle arm home sensor PS32 [1] detects the home position of the bundle arm. Control The clincher moves up or down only in the saddle stitching mode. It pushes up the fore edge side of the paper [6] with the bundle arm assist plate [4] to tilt it to the front. Type of paper 1 Punching function Paper size 2 holes: Compliance is mandatory for products marketed in the United States. Control The bundle press motor M23 rotates in the forward direction to conduct the paper press operation [2] to press the paper properly when the bundle press movement motor M17 completes the press position search [1].

Product name In this manual, each of the products is described as follows: Folding mode fdtoc Paper through from the PI Paper exit to the main tray, paper through to the next option Paper through from the main body paper exit Folding Paper exit to the sub tray Sub tray mode Exited to the sub tray with no processing made.

  DELTA BIGFOOT 500CC DRIVER DOWNLOAD

When the automatic “Erase outside of original” is drvelop ON Out of original auto-reading area equals to the max. Movement is made according to the staple mode.

OS Compatibility

Type Type Grip conveyance type horizontal stacker Conveyance indo Entrance convey- Roller conveyance method ance Stacker tray con- Grip conveyance method veyance Sub tray convey- Roller conveyance method ance Coupling convey- Roller conveyance LS only Page 1. The release arm [5] held upward by the spring [1] lifts up the pick-up roller mounting plate [4] to release the pick-up roller [3].

Got it, continue to print. Mechanism The trimming is conducted by the trimmer blade driven by the trimmer blade motor M31 while the paper is pressed by the trimmer press. Type Type Torque limiter separation type seat feeding device B.

Develop ineo+ Manuals

Mechanism The clincher shelters at the lower position to obtain space between the stapler and the clincher when the paper is conveyed between them. Mechanism The bundle clip is the mechanism to hold the paper that the bundle arm conveyed to the slope and convey the paper to the bundle press stage with its fore edge side to the trimmer section. Mechanism The trimmer press is the mechanism to hold the paper at its fore-edge side to prevent the trimming misalign- ment.

As shown below, each time interval between the edge detections is determined with the counts of clock signal, and the counts with the PS8 and those with the PS9 are recorded separately. The actual life of each consumable will vary depending on use and other printing variables including page coverage, page size, media type, continuous or intermittent printing, ambient temperature and humidity. This machine uses four photoconductor drums correspond to yellow, magenta, cyan, and black colors.

Develop ineo+ 6500 Manuals

Paper exit belt devepop The paper exit arm [2] mounted on the paper exit belt [1] exits the paper to the main tray in the stapling mode. Connect power plug to grounded wall outlet. Devlop 1 Bundle exit mechanism The paper is exited to the bundle exit tray [12]. Paper Path Theory of Operation Ver1. PK 2 to 3 holes [12] [13] [11] [10] [11] [10] 15kjt2enb Punch motor M Groove of the switching cam Eccentric cam Projection of the punch blade Slide link [10] Projection of the switching cam Switching cam After completing the alignment operation of the last paper [3], M18 rotates [4] to move down the saddle stitching stopper to the folding position.

  HP PHOTOSMART MZ60 DRIVER

Mechanism The trimmer paddle [2] is provided to prevent the saddle-stitched paper from creating trails with scraps by get- ting into the paper during the press operation, and to drop the scraps forcibly. The overlap mechanism is the mechanism to overlap the paper in adequate paper conveyance order. The opening keeps widening until the overcurrent of M32 is detected [4]. All specifications refer to A4-size paper of 80 gsm quality. After the 2nd folding conveyance sensor PS53 turns ON, develoo paper is conveyed by a specified number of steps.

Staple control When the paper length is less than mm, paper exit unit is not opened. Step 2 Laser exposure process Forms an electrostatic latent image on ibeo photoconductor drum.

Toner refresh mode control a03ut2cca A. Decurler Paper that has passed through the 1st gate is conveyed to the grip belt by the decurler roller.