ELLIX 10 DRIVER

Recovery from the Auto Cutter Error If a foreign object such as a push pin or paper clip drops in the auto cutter and causes the auto cutter to lock up, the printer enters an error state. Unpacking Your printer box should include these items. Direct pickups are not available from our warehouses or offices. When the light blinks, it indicates the self-test printing standby state or macro execution standby state when the macro execution command is used. If the motor knob cannot be rotated, rotate it in the reverse direction to loosen it; then send the DLE ENQ n command.

Uploader: Magami
Date Added: 1 May 2015
File Size: 41.73 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 40829
Price: Free* [*Free Regsitration Required]

Tear off the paper. The Near-End sensor is set at adjustment 3.

The printer prints a pattern using the 6. Push the knob Near-End sensor up to scale 4 or 5. Do not plug in the power cord. Sllix close the cover. All our POS products are suitable for retail, hospitality, healthcare, government, restaurants, warehouses, logistics, manufacturing and more. Reviews There are no reviews yet. Pull out a small amount of paper, as shown.

For more information, please contact our customer service. When you turn on the hexadecimal dump function, the printer prints all commands and data in hexadecimal format along with a guide section to help you find specific commands.

  KINGSUN SF 620 USB INFRARED DRIVER

PRINTER, SAM4S ELLIX 10

Refer to Table Eellix. Kansaki Specialty Papers, Inc. If any items are damaged or missing, please contact your dealer for assistance. Do not touch the print head thermal elements. The self-test checks are as follows; 1. If you find that there is too much paper remaining on the roll paper when the Near-End sensor is triggered. Plug the interface connector into the serial port on the printer.

The printer head becomes very hot just after printing and is very dangerous. Plug the DC cord connector into the power jack on the printer. Nippon Paper eellix Co. The self test The self-test checks whether the printer has any problems. This is the appropriate scale for the recommended paper thickness. Also, be sure to turn off the printer power before cleaning the printer head.

ELLIX-10 User Manual

These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. If the problem is not serious, the auto cutter returns ellux its normal position without any intervention by the user. This can give you a warning when the paper is almost out.

  D-LINK DWL-G122 REV B1 DRIVER

Otherwise, you may damage the power supply or the printer. Press the FEED button to continue printing. Open the paper roll cover by pressing the cover-open button.

Extended exposure to direct light may cause discoloration or faded printing. When data is transmitted and printing is executed, paper may shift 1 to 3 dots from the print starting position, which especially affects bit-image printing.

Ellix 10 Printer

Insert the paper roll as shown. If the item is out of ellid or has been discontinued, we will notify you immediately via phone or email. Recovery from the Auto Cutter Error If a foreign object such as a push pin or paper clip drops in the auto cutter and causes the auto cutter to lock up, the printer enters an error state.